وبلاگ تخصصی مهندسی ژئوتکنیک

Design of Structures and Foundations for Vibrating Machines

by Suresh C. Arya, Michael O'Neil, George Pincus

PASSWORD: www.khosrovani.org

DOWNLOAD

Soil Mechanics Fundamentals and Applications

Isao Ishibashi, Hemanta Hazarika

Introduction
Physical Properties of Soils
Clays and Their Behavior
Soil Classification
Compaction
Flow of Water through Soils
Effective Stress
Stress Increments in Soil Mass
Settlements
Mohr’s Circle in Soil Mechanics
Shear Strength of Soils
Lateral Earth Pressure
Site Exploration
Bearing Capacity and Shallow Foundations
Deep Foundations
Slope Stability

PASSWORD: www.khosrovani.org

DOWNLOAD

دانلود کتاب روشهای الکتریکی در اکتشافات ژئوفیزیکی حوضه های رسوبی عمیق

دکتر فرزاد مهدوی

با تشکر از دکتر فرزاد مهدوی (مترجم و ناشر حقیقی کتاب) بابت به اشتراک گذاشتن رایگان این کتاب در وبلاگ تخصصی مهندسی ژئوتکنیک

جایگاه و نقش روشهای الکتریکی
خواص الکتریکی سنگهای رسوبی
روشهای مقاومت ویژه جریان مستقیم
روشهای الکترومغناطیسی با چشمه طبیعی
روشهای الکترومغناطیسی با چشمه کنترل شده
امکان شناسایی مستقیم نفت

رمز فایل: www.khosrovani.org

لینک دانلود

Foundation Engineering for Expansive Soils

John D. Nelson, Kuo Chieh Chao, Daniel D. Overton, Erik J. Nelson

Foundation Engineering for Expansive Soils fills a significant gap in the current literature by presenting coverage of the design and construction of foundations for expansive soils. Written by an expert author team with nearly 70 years of combined industry experience, this important new work is the only modern guide to the subject, describing proven methods for identifying and analyzing expansive soils and developing foundation designs appropriate for specific locations.

Expansive soils are found worldwide and are the leading cause of damage to structural roads. The primary problem that arises with regard to expansive soils is that deformations are significantly greater than in non-expansive soils and the size and direction of the deformations are difficult to predict. Now, Foundation Engineering for Expansive Soilsgives engineers and contractors coverage of this subject from a design perspective, rather than a theoretical one. Plus, they'll have access to case studies covering the design and construction of foundations on expansive salts from both commercial and residential projects.

Provides a succinct introduction to the basics of expansive soils and their threats
Includes information on both shallow and deep foundation design
Profiles soil remediation techniques, backed-up with numerous case studies
Covers the most commonly used laboratory tests and site investigation techniques used for establishing the physical properties of expansive soils

If you're a practicing civil engineer, geotechnical engineer or contractor, geologist, structural engineer, or an upper-level undergraduate or graduate student of one of these disciplines, Foundation Engineering for Expansive Soils is a must-have addition to your library of resources.

PASSWORD: www.khosrovani.org

DOWNLOAD

Craig's Soil Mechanics, Seventh Edition

This seventh edition of Soil Mechanics, widely praised for its clarity, depth of explanation and extensive coverage, presents the fundamental principles of soil mechanics and illustrates how they are applied in practical situations. Worked examples throughout the book reinforce the explanations and a range of problems for the reader to solve provide further learning opportunities.

PASSWORD: www.khosrovani.org

DOWNLOAD

The Mechanics of Soils and Foundations, Second Edition

by John Atkinson

Ideal for undergraduates of geotechnical engineering for civil engineers, this established textbook sets out the basic theories of soil mechanics in a clear and straightforward way; combining both classical and critical state theories and giving students a good grounding in the subject which will last right through into a career as a geotechnical engineer.

The subject is broken down into discrete topics which are presented in a series of short, focused chapters with clear and accessible text that develops from the purely theoretical to discussing practical applications. Soil behaviour is described by relatively simple equations with clear parameters while a number of worked examples and simple experimental demonstrations are included to illustrate the principles involved and aid reader understanding.

PASSWORD: www.khosrovani.org

DOWNLOAD

Soil Strength and Slope Stability

by J. Michael Duncan , Stephen G. Wright

Authoritative, state--of--the--art guidance to soil strength and slope--stability analysis Through clear, concise language and practical examples, Soil Strength and Slope Stability describes state of the art methods for evaluating soil strength, and for analysis, design and stabilization of slopes in soil. The principles oflimit equilibrium analysis, and appropriate use of computer programs are emphasized. Methods are described for checking the results of complex analyses, and for presenting results of slope stability analyses clearly. These are illustrated through many examples. Written by two recognized experts in the field, Soil Strength and SlopeStability features:* Case histories of landslides, embankment failures, excavation slope failures* Principles that govern the shear strength of soils, including shear strength of municipal solid waste* Methods for estimating and evaluating shear strengths based on back analysis of slope failures and stable slopes* Explanations of the conditions that slopes must be designed to endure* Detailed explanations of analysis methods for short--term and long--term stability, rapid drawdown, earthquake, and partial consolidation* A wide range of analysis methods, methods for verifying results, and advice on presenting the results of slope stability analyses,including the importance of using multiple and/or independent methods* Methods for repairing failed slopes and stabilizing marginally stable slopes Visually informative with more than 250 illustrations, Soil Strength and Slope Stability is a complete and practical resource for geotechnical engineers, engineering geologists, civil engineers, geologists, environmental engineers,and students.

PASSWORD: www.khosrovani.org

DOWNLOAD

Basic Geotechnical Earthquake Engineering

Dr. Kamalesh Kumar

This title features subject matter that is organised logically to make it easy and interesting for the students. Emphasis has been given on the basics of geotechnical earthquake engineering. Home work problems have been given at the end of each chapter to test the understanding of concepts given in the chapter. At the end of appropriate chapters solved numerical problems as well as exercise numerical problems as home work problems have also been to make the related concepts clear.

PASSWORD: www.khosrovani.org

DOWNLOAD

Engineering Rock Mass Classification

Tunnelling, Foundations and Landslides

Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions.

Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton’s Q and Q’ systems, Bieniawski’s RMR, Laubscher’s MRMR and Hoek’s and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design.

Identify the most significant parameters influencing the behaviour of a rock mass
Divide a particular rock mass formulation into groups of similar behaviour, rock mass classes of varying quality.
Provide a basis of understanding the characteristics of each rock mass class
Relate the experience of rock conditions at one site to the conditions and experience encountered at others
Derive quantitative data and guidelines for engineering design
Provide common basis for communication between engineers and geologists

PASSWORD: www.khosrovani.org

DOWNLOAD

Soil Mechanics: A One-Dimensional Introduction

David Muir Wood

This book teaches the principles of soil mechanics to undergraduates, along with other properties of engineering materials, to which the students are exposed simultaneously. Using the critical state method of soil mechanics to study the mechanical behavior of soils requires the student to consider density alongside effective stresses, permitting the unification of deformation and strength characteristics. This unification aids the understanding of soil mechanics. This book explores a one-dimensional theme for the presentation of many of the key concepts of soil mechanics - density, stress, stiffness, strength, and fluid flow - and includes a chapter on the analysis of one-dimensional consolidation, which fits nicely with the theme of the book. It also presents some theoretical analyses of soil-structure interaction, which can be analyzed using essentially one-dimensional governing equations. Examples are given at the end of most chapters, and suggestions for laboratory exercises or demonstrations are given.

password: www.khosrovani.org

DOWNLOAD

دانلود کتاب جداول مهم مهندسی عمران



کتاب حاضر یکی از بهترین کتابهای دم دستی برای هر مهندس عمرانی است که شامل جداول مهم برای مهندسین عمران است که شامل چند فصل مثل جداول مقاطع مختلف ,جداول تحلیل سازه ها ,جداول مهندسی پی و خاک ,تاسیسات و ... در 257 صفحه میباشد که اکنون در اختیار شما برای دانلود قرار میگیرد امیدوارم مفید واقع شود. دانلود کتاب جداول مهم مهندسی عمران

کتاب دینامیک سازه آنیل چوپرا ویرایش سوم

Dynamics of Structures 3rd Ed 2006 - Anil K. Chopra

* Publisher: Prentice Hall
* Number Of Pages: 912
* Publication Date: 2006-09-01
* ISBN-10 / ASIN: 013156174X
* ISBN-13 / EAN: 9780131561748

Product Description:
Designed for senior-level and graduate courses in Dynamics of Structures and Earthquake Engineering. The text includes many topics encompassing the theory of structural dynamics and the application of this theory regarding earthquake analysis, response, and design of structures. No prior knowledge of structural dynamics is assumed and the manner of presentation is sufficiently detailed and integrated, to make the book suitable for self-study by students and professional engineers.

به حجم 31.3 مگابایت در فرمت فشرده (rar)

برای دانلود اینجا کلیک کنید...

http://www.4shared.com/file/136019902/8f76ba13/Dynamics_of_Structures_3rd_Ed_2006_-_Anil_K_Chopra.html

دانلود کتاب لاتین - Applying AutoCAD 2010
McGr aw-H ill | 2009 | ISBN: 0073375446 | 822 pages | PDF | 13,8 MB

Applying AutoCAD 2010 has been updated to accompany the new version of the AutoCAD software, which includes some useful features for both 3D modeling and 2D documentation. Some of these features include:

3D Mesh Modeling --- A 3D mesh is a new type of object that can be reshaped by pushing or pulling on its surface. The object can be converted to a 3D solid.

2D Parametric Design --- Geometric constraints between 2D objects are now available, which means it is possible to force lines to be parallel or perpendicular to one another. Dimensional constraints allow control of a dimension based on a rule or a formula.

In addition, the text reflects changes to the user interface, which has been redesigned to make some of the options more interactive and context-sensitive.

The book retains its easy to follow step-by-step format.

نکته : با دانلودر مرورگر خود دانلود نمایید

Download
http://filepost.com/files/827f5m8a/0073375446AutoCA.pdf/
http://uploading.com/files/1fm71317/0073375446AutoCA.pdf

Bridge Engineering:Construction and Maintenance
(Principles and Applications in Engineering)
http://rapidshare.com/files/17603426/Bridge_Engineering_Construction_and_Maintenance_0849316847.rar
===================================================================================
Bridge Engineering : Substructure Design
(Principles and Applications in Engineering)
http://rapidshare.com/files/18371151/Bridge_Engineering_Substructure_Design_0849316812.rar
===================================================================================
Bridge Engineering : Seismic Design
(Principles and Applications in Engineering)
http://rapidshare.com/files/18472112/Bridge_Engineering_Seismic_Design_0849316839.rar
===================================================================================
AASHTO Standard Specification for Highway Bridges, 16th Ed
http://rapidshare.com/files/48177306/GRSSHB.rar
===================================================================================
CONCRETE BRIDGE ENGINEERING:
Performance and Advanced
http://rapidshare.com/files/13273864/Concrete_Bridge_Engineering_Performance_and_Advanced.rar
===================================================================================
BRIDGE ENGINEERING
http://w13.easy-share.com/1251983.html?F11
http://depositfiles.com/files/1099805
===================================================================================
REINFORCED CONCRETE DEEP BEAMS
http://rapidshare.com/files/11076575/Reinforced_Concrete_Deep_Beams_-_Prof._F.K.Kong.rar.html
http://www.rapidshare.com/files/4320086/Reinforced_Concrete_Deep_Beams.rar
http://mihd.net/z9ufog
===================================================================================
STRUCTURAL DETAILS in CONCRETE
http://rapidshare.de/files/22577434/Bangash_-_Structural_Details_In_Concrete__Blackwell_Scientific_1992_.pdf
===================================================================================
CONCRETE FORMWORK SYSTEMS
http://rapidshare.com/files/10841109/Concrete_Formwork_Systems_0824700724.rar
http://mihd.net/9auj70
===================================================================================
STRENGTHENING of REINFORCED CONCRETE STRUCTURES
http://www.rapidshare.com/files/4384913/Strengthening_of_Reinforced_Concrete_Structures.rar
===================================================================================
REPAIR, PROTECTION and WATERPROOFING of CONCRETE STRUCTURES, 3th Ed.
http://rapidshare.com/files/11933404/Repair__Protection_and_waterproofing_of_concrete_structures.pdf
http://www.file2upload.com/file/10017/ebc-repair–protection-and-waterproofing-of-concrete-structures-isbn10-0419202803-pdf.html
http://mihd.net/0mzqel
===================================================================================
PRACTICAL FOUNDATION ENGINEERING HANDBOOK, 2nd Ed
http://www.rapidshare.com/files/10956077/Practical_Foundation_Engineering_Handbook.rar
===================================================================================
PILE DESIGN and CONSTRUCTION PRACTICE, 4th Ed
http://rapidshare.com/files/32594371/Pile.Design.and.Construction.Practice-0419184503.rar
===================================================================================
FOUNDATION ANALYSIS and DESIGN, 5th Ed
http://rapidshare.com/files/9780506/bowles_-_foundation_analysis_and_design.rar
http://mihd.net/x5nsib
===================================================================================
COLD-FORMED STEEL DESIGN, 3rd Ed
http://rapidshare.com/files/11574013/0471348090.rar
http://mihd.net/02a3bh
===================================================================================
FINITE ELEMENT METHOD: A Practical Course
http://rapidshare.com/files/2332110/TheFinElementMethodpracticalcourse_muya.rar
http://www.4shared.com/file/8694599/e2f9a67d/TheFinElementMethodpracticalcourse_muya.html
===================================================================================
STABILITY OF STRUCTURES:
Elastic, Inelastic, Fracture, and Damage Theories
http://mihd.net/hywe94
===================================================================================
STANDARD HANDBOOK for CIVIL ENGINEERS, 4th Ed
http://www.rapidshare.com/files/18649908/standard_handbook_for_civil_engineers.rar
http://rapidshare.com/files/18062809/standard_handbook_for_civil_engineers.rar
===================================================================================
HANDBOOK of CIVIL ENGINEERING CALCULATIONS
http://www.rapidshare.com/files/9956411/Handbook_of_Civil_Engineering_Calculations_by_Hicks__Tyler_Gregory_-_1999.rar
http://www.rapidshare.com/files/15234963/Handbook_of_Civil_Engineering_Calculation.rar
===================================================================================
HANDBOOK of STRUCTURAL ENGINEERING, 2nd Ed
http://rapidshare.com/files/9628592/handbook_of_structural_engineering.rar
http://www.4shared.com/file/8704190/5a6007d1/handbook_of_structural_engineering.html
http://www.ftp2share.com/file/13657/ctural_engineering.rar.html
Jika memerlukan PASSWORD: ebooksclub
===================================================================================
STRUCTURAL ANALYSIS with FINITE ELEMENTS
http://rapidshare.com/files/14583894/structural_analysis_with_finite_elements.pdf

www.elektrotekno.com
http://rapidshare.com/files/57113774/ASCE_Journal_of_Structural_Engineering_October_2007.rar
===================================================================================
ACI STRUCTURAL JOURNAL

D. Ngo and A.C. Scordelis .(1967). “Finite Element Analysis of Reinforced Concrete Beams”, ACI Journal , March 1967
http://www.box.net/public/szj1pklj8g
===================================================================================
Peter Marti .(1985). “Basic Tools of Reinforced Concrete Beam Design”, ACI Journal, January-February 1985
http://www.box.net/public/l37ibquiar
===================================================================================
Frank J. Vecchio and Michael P. Collins.(1986). “The Modified Compression-Field Theory for Reinforced Concrete Element Subjected to Shear”, ACI Journal, March-April 1986
http://wiryanto.files.wordpress.com/2006/11/jp2.pdf
===================================================================================
Julio A. Ramirez and John E. Breen .(1991). “Evaluation of a Modified Truss-Model Approach for Beams in Shear”, ACI Structural Journal, V.88, No.5, September-October 1991
http://www.box.net/public/usliq65a3y
===================================================================================
Michael P. Collins, Denis Mitchell, Perry Adebar and Frank J. Vecchio .(1996). “A General Shear Design Method”, ACI Structural Journal, January-February 1996
http://wiryanto.files.wordpress.com/2006/11/jp24.pdf
===================================================================================
Brian S. Maxwell and John E. Breen. (2000). “Experimental Evaluation of Strut-and-Tie Model Applied to Deep Beam with Opening”, ACI Structural Journal, V.97 No.1, Januari-Februari 2000
http://www.box.net/public/z4rfdzhi9t
===================================================================================
Federico A. Tavarez, Lawrence C. Bank, and Michael E. Plesha .(2003). “Analysis of Fiber-Reinforced Polymer Composite Grid Reinforced Concrete Beams”, ACI Structural Journal, March-April 2003
http://wiryanto.files.wordpress.com/2006/11/tavarezbankpleshaacistructures2003.pdf
===================================================================================
Daniel Palermo and Frank J. Vecchio .(2003). “Compression Field Modeling of Reinforced Concrete Subjected to Reversed Loading: Formulation”, ACI Structural Journal, V. 100 / 5
http://wiryanto.files.wordpress.com/2006/11/100-s64.pdf
===================================================================================
Joel M. Barron and Mary Beth D. Hueste.(2004). “Diaphragm Effects in Rectangular Reinforced Concrete Buildings”, ACI Structural Journal, V. 101 / 5
http://wiryanto.files.wordpress.com/2006/11/acidiaphragm.pdf
===================================================================================
uan F. Correal, M. Saiid Saiidi, David Sanders, and Saad El-Azazy.(2007). “Shake Table Studies of Bridge Columns with Double Interlocking Spirals”, ACI Structural Journal V. 104 / 4
http://www.box.net/shared/g8slapk4i3
===================================================================================
Khaldoun N. Rahal. (2007). “Combined Torsion and Bending in Reinforced and Prestressed Concrete Beams Using Simplified Method for Combined Stress-Resultants”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/je82fqtyaf
===================================================================================
P. Revathi and Devdas Menon.(2007). “Slenderness Effects in Reinforced Concrete Beams”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/ohojsz9fg1
===================================================================================
Keun-Hyeok Yang, Heon-Soo Chung, and Ashraf F. Ashour.(2007).”Influence of Shear Reinforcement on Reinforced Concrete Continuous Deep Beams”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/l3706of3ai
===================================================================================
Joseph Robert Yost, Shawn P. Gross, David W. Dinehart, and Jason J. Mildenberg.(2007). “Flexural Behavior of Concrete Beams Strengthened with Near-Surface-Mounted CFRP Strips”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/vd2spmqec5
===================================================================================
Kyoung-Kyu Choi, Mahmoud M. Reda Taha, and Alaa G. Sherif .(2007). “Simplified Punching Shear Design Method for Slab-Column Connections Using Fuzzy Learning”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/1jxdyyrvgn
===================================================================================
Mary Beth D. Hueste, JoAnn Browning, Andres Lepage, and John W. Wallace .(2007). “Seismic Design Criteria for Slab-Column Connections”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/r4ibkb631s
===================================================================================
Hung-Jen Lee and Jen-Wen Ko. (2007).”Eccentric Reinforced Concrete Beam-Column Connections Subjected to Cyclic Loading in Principal Directions”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/8l2xn6cj0u
===================================================================================
Alexandros G. Tsonos.(2007). “Cyclic Load Behavior of Reinforced Concrete Beam-Column Subassemblages of Modern Structures”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/0o02gth37k
===================================================================================
Nam Ho Lee, Kang Sik Kim, Chang Joon Bang, and Kwang Ryeon Park.(2007). “Tensile-Headed Anchors with Large Diameter and Deep Embedment in Concrete”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/j6fmpbtxjg
===================================================================================
José R. Martí-Vargas, César A. Arbeláez, Pedro Serna-Ros, and Carmen Castro-Bugallo.(2007). “Reliability of Transfer Length Estimation from Strand End Slip”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/iljmpakgze
===================================================================================
Miguel Fernández Ruiz and Aurelio Muttoni.(2007). “On Development of Suitable Stress Fields for Structural Concrete”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/augbzaxqdz
===================================================================================
Discussion by Himat Solanki: Shear Strength of Reinforced Concrete T-Beams without Transverse Reinforcement. Paper by A. Koray Tureyen, Tyler S. Wolf, and Robert J. Frosch (From the Sept.-Oct. 2006 ACI Structural Journal)
http://www.box.net/shared/kjy1104f10
===================================================================================
BULLETIN of THE NEW ZEALAND NSEE
M.J. Nigel Priestley .(1993). “Myths and Fallacies in Earthquake Engineering - Conflict between Design and Reality”, Bulletin of The New Zealand National Society for Earthquake Engineering, Vol. 26, No.3 September 1993
http://www.box.net/public/15nx6nx0b2
===================================================================================
CANADIAN JOURNAL of CIVIL ENGINEERING

M.P. Collins, F.J. Vecchio and G. Mehlhorn .(1985). “An international competition to predict the response of reinforced concrete panels”, Can. J. Civ. Eng. 12: 624�644
http://www.box.net/public/gyr4m3orln
===================================================================================
F.J. Vecchio and S. Balopoulou .(1990). “On the nonlinear behaviour of reinforced concrete frames”, Can. J. Civ. Eng. 17: 698�704
http://wiryanto.files.wordpress.com/2006/11/jp12.pdf
===================================================================================
R.G. Selby and F.J. Vecchio .(1997). “A constitutive model for analysis of reinforced concrete solids”, Can. J. Civ. Eng. 24: 460�470
http://wiryanto.files.wordpress.com/2006/11/jp27.pdf
===================================================================================
D. Svecova and R.J. Eden .(2004). “Flexural and shear strengthening of timber beams using glass fibre reinforced polymer bars ― an experimental investigation”, Can. J. Civ. Eng. 31: 45�55
http://www.box.net/public/efgjx92km6
===================================================================================
William Cavers and Gordon A. Fenton .(2004). “An evaluation of pile cap design methods in accordance with the Canadian design standard”, Can. J. Civ. Eng. 31: 109�119
http://wiryanto.files.wordpress.com/2006/11/l03-075.pdf
===================================================================================
Aftab A. Mufti, Baidar Bakht, Dagmar Svecova, and Vidyadhar Limaye .(2004). “Failure tests on full-scale models of grout laminated wood decks”, Can. J. Civ. Eng. 31: 133�145
http://wiryanto.files.wordpress.com/2006/11/l03-088.pdf
===================================================================================
Ricardo N.F. do Carmo and Sérgio M.R. Lopes .(2005). “Ductility and linear analysis with moment redistribution in reinforced high-strength concrete beams”, Can. J. Civ. Eng. 32: 194�203
http://wiryanto.files.wordpress.com/2006/11/l04-080.pdf
===================================================================================
Y.F. Li, S.H. Chen, K.C. Chang, and K.Y. Liu .(2005). “A constitutive model of concrete confined by steel reinforcements and steel jackets”, Can. J. Civ. Eng. 32: 279�288
http://wiryanto.files.wordpress.com/2006/11/l04-093.pdf
===================================================================================
COMPUTER and CONCRETE

Frank J. Vecchio, Evan C. Bentz and Michael P. Collins .(2004). “Tools for forensic analysis of concrete structures”, Computers and Concrete, Vol. 1, No. 1 (2004) 1-14
http://wiryanto.files.wordpress.com/2006/11/cac0101001.pdf
===================================================================================
COMPUTER and STRUCTURES

Lip H. Teh.(2004).”Beam element verification for 3D elastic steel frame analysis”, Computers and Structures 82 (2004) 1167�1179
http://www.box.net/public/7hbho3qk2g
===================================================================================
COMPOSITE STRUCTURES

A.J.M. Ferreira, P.P. Camanho, A.T. Marques, A.A. Fernandes .(2001). “Modelling of concrete beams reinforced with FRP re-bars”, Composite Structures 53 (2001) 107-116
http://wiryanto.files.wordpress.com/2006/11/experimental-study-of-composite-structures.pdf
==================================================================================
CONCRETE INTERNATIONAL

D.M. Rogowsky and J.G. MacGregor .(1986). “Design of Reinforced Concrete Deep Beams - Using the strut and tie model”, Concrete International, August 1986
http://www.box.net/public/kt5i92i4qt
==================================================================================
James K. Wight And Gustavo J. Parra-Montesinos . (2003). “Strut-and-Tie Model for Deep Beam Design: A practical exercise using Appendix A of the 2002 ACI Building Code”, Concrete International, May 2003
http://wiryanto.files.wordpress.com/2006/11/ci2505wight.pdf
==================================================================================
EARTHQUAKE ENGINEERING and ENGINEERING SEISMOLOGY

Thomas Paulay .(1999). “A Simple Seismic Design Strategy Based on Displacement and Ductility Compatibility”, Earthquake Engineering and Engineering Seismology, Vol.1 No.1
http://wiryanto.files.wordpress.com/2006/11/ee0101-5.pdf
==================================================================================
C. H. Yeh and C. H. Loh .(2001). “Methodology of Seismic Hazard Analysis and Damage Assessment”, Earthquake Engineering and Engineering Seismology, Vol.3 No.1
http://www.box.net/public/xnyb696oic
==================================================================================
EARTHQUAKE ENGINEERING and STRUCTURAL DYNAMICS

Sinan Akkar and Julian J. Bommer.(2007). “Prediction of elastic displacement response spectra in Europe and the Middle East”, Earthquake Engng Struct. Dyn. 2007; 36:1275�1301
http://www.box.net/shared/bsu3j90reh
==================================================================================
Chin-Hsiung Loh, Jerome P. Lynch, Kung-Chun Lu, Yang Wang, Chia-Ming Chang, Pei-Yang Lin and Ting-Hei Yeh.(2007). “Experimental verification of a wireless sensing and control system for structural control using MR dampers”, Earthquake Engng Struct. Dyn. 2007; 36:1303�1328
http://www.box.net/shared/xope67u9sf
==================================================================================
Songye Zhu and Yunfeng Zhang.(2007). “Seismic behaviour of self-centring braced frame buildings with reusable hysteretic damping brace”, Earthquake Engng Struct. Dyn. 2007; 36:1329�1346
http://www.box.net/shared/k7xuo3rizg
==================================================================================
R. Pinho, C. Casarotti and S. Antoniou.(2007). “A comparison of single-run pushover analysis techniques forseismic assessment of bridges”, Earthquake Engng Struct. Dyn. 2007; 36:1347�1362
http://www.box.net/shared/y3prl0ffq5
==================================================================================
Manuel Navarro,Francisco Vidal, Takahisa Enomoto, Francisco J. Alcala, Antonio Garcia-Jerez, Francisco J. Sanchez and Norio Abeki.(2007). “Analysis of the weightiness of site effects on reinforced concrete (RC) building seismic behaviour: The Adra town example (SE Spain)”, Earthquake Engng Struct. Dyn. 2007; 36:1363�1383
http://www.box.net/shared/7gxy9mvk4z
==================================================================================
M. R. Ghayamghamian, and G. R. Nouri.(2007). “On the characteristics of ground motion rotational components using Chiba dense array data”, Earthquake Engng Struct. Dyn. 2007; 36:1407�1429
http://www.box.net/shared/ls81864pe3
==================================================================================
EARTHQUAKE SPECTRA

Peter Fajfar .(2000). “A Nonlinear Analysis Method for Performance Based Seismic Design”, Earthquake Spectra, Vol.16 No.3
http://www.box.net/public/67kkzmp6pq
==================================================================================
Keith A. Porter,James L. Beck,and Rustem Shaikhutdinova .(2004). “Simplified Estimation of Economic Seismic Risk for Buildings”, Earthquake Spectra, Vol.20,No.4
http://www.box.net/public/r4r0aoqgjb
==================================================================================
ENGINEERING CONCRETE

E. Montoya, F.J. Vecchio, S.A. Sheikh .(2004). “Numerical evaluation of the behaviour of steel and FRP-confined concrete columns using compression field modelling”, Engineering Structures 26(2004) 1535-1545
http://wiryanto.files.wordpress.com/2006/11/jp52.pdf
==================================================================================
ENGINEERING STRUCTURES

Seung-Eock Kim, Kyung-Won Kang, Dong-Ho Lee .(2003). “Full-scale testing of space steel frame subjected to proportional loads”, Engineering Structures 25 (2003) 69�79
http://www.box.net/public/l59knmesqt
==================================================================================
H. Sezen, A.S. Whittaker, K.J. Elwood, K.M. Mosalam .(2003). “Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey”, Engineering Structures 25 (2003) 103�114
http://www.box.net/public/mgu9o9anxb
==================================================================================
L. Cavaleri, N. Miraglia, M. Papia .(2003). “Pumice concrete for structural wall panels”, Engineering Structures 25 (2003) 115�125
http://www.box.net/public/6tt6397fhr
==================================================================================
John L. Wilson .(2003). “Earthquake response of tall reinforced concrete chimneys”,Engineering Structures 25 (2003) 11�24
http://www.box.net/public/nysv1ay78n
==================================================================================
M. Brun, J.M. Reynouard, L. Jezequel .(2003). “A simple shear wall model taking into account stiffness degradation”, Engineering Structures 25 (2003) 1�9
http://www.box.net/public/qqe5cjv9id
==================================================================================

ENGINEERING JOURNAL - AISC

William A. Litle.(1966). “Small Scale Models for Steel Frameworks”, AISC Engineering Journal, July 1966
http://www.box.net/shared/jsk78idohq
==================================================================================
W.H. Munse .(1967). “High-Strength Bolting”, AISC Engineering Journal, January 1967
http://wiryanto.files.wordpress.com/2006/11/04_1_018.PDF
==================================================================================
A. Lally and W. A. Milek, JR..(1969). “Bridge Construction Details”, AISC Engineering Journal, January 1969
http://www.box.net/public/710m4vupjs
==================================================================================
Allen E. Wehrmeister.(1969). “Use of Ultrasonic Testing in the Structural Steel Industry”, AISC Engineering Journal, April 1969
http://www.box.net/public/cs2qne7249
==================================================================================
R. H. R. Tide And T. V. Galambos .(1970). “Composite Open-Web Steel Joists”, AISC Engineering Journal, January 1970
http://www.box.net/public/vr0tv26fm0
==================================================================================
Fazlur R. Khan and Anthony F. Nassetta.(1970).”Temperature Effects on Tall Steel Framed Buildings - Part 3―Design Considerations”, AISC Engineering Journal,October 1970
http://www.box.net/public/dhkjchygk5
==================================================================================
John H. A. Struik, Abayomi O. Oyeledun and John W. Fisher. (1973). “Bolt Tension Control with a Direct Tension Indicator”, AISC Engineering Journal, First Quarter 1973
http://www.box.net/shared/spvest96ie
==================================================================================
T.V. Galambos .(1978). “Load Factor Design of Steel Buildings”, AISC Engineering Journal, July 1978
http://wiryanto.files.wordpress.com/2006/11/09_3_108.pdf
==================================================================================
S.T. Rolfe .(1977). “Fracture and Fatigue Control in Steel Structures”, AISC Engineering Journal, First Quarter
http://wiryanto.files.wordpress.com/2006/11/14_1_002.PDF
==================================================================================
N. Krishnamurthy .(1978). “A Fresh Look at Bolted End-Plated Behavior and Design”, Engineering Journal, Second Quarter
http://wiryanto.files.wordpress.com/2006/11/15_2_039.PDF
==================================================================================
John D. Griffiths .(1984). “End-Plate Moment Connections - Their Use and Misuse”, Engineering Journal, First Quarter
http://wiryanto.files.wordpress.com/2006/11/21_1_032.PDF
==================================================================================
Michael P. Cohen .(1986). “Design Solutions Utilizing the Staggered-steel Truss System”, Engineering Journal, Third Quarter
http://wiryanto.files.wordpress.com/2006/11/265_ej_cohen.pdf
==================================================================================
Lambert Tall .(1989). “The Reinforcement of Steel Columns”, Engineering Journal, First Quarter 1989
http://www.box.net/public/i6lpmre60n
==================================================================================
Mark A. Bradford .(1991). “Buckling of Prestressed Steel Girders”, Engineering Journal, Third Quarter 1991
http://www.box.net/public/a2qbaen4js
==================================================================================
Patrick D. Zuraski .(1992). “The Significance and Application of Cb in Beam Design”, Engineering Journal, First Quarter
http://wiryanto.files.wordpress.com/2006/11/the-significance-and-application-ofcb-in-beamdesign.pdf
==================================================================================
W. McGuire .(1992). “Computers and Steel Design”, Engineering Journal, Fourth Quarter
http://wiryanto.files.wordpress.com/2006/11/computer-and-steel-design-wmc-guire.pdf
==================================================================================
Engineering Journal Vol. 29 tahun 1992
http://wiryanto.wordpress.com/2006/12/14/engineering-journal-vol29-th-1992-lengkap-gratis/
==================================================================================
Engineering Journal Vol. 30 tahun 1993
http://wiryanto.wordpress.com/2006/12/13/aisc-journal-bundel-1993-gratis/

وبلاگ تخصصی مهندسی ژئوتکنیک

وبلاگ مهندس علیرضا خسروانی مقدم

Design of Structures and Foundations for Vibrating Machines

Soil Mechanics Fundamentals and Applications

دانلود کتاب روشهای الکتریکی در اکتشافات ژئوفیزیکی حوضه های رسوبی عمیق

Foundation Engineering for Expansive Soils

Foundation Engineering for Expansive Soils

Craig's Soil Mechanics, Seventh Edition

The Mechanics of Soils and Foundations, Second Edition

The Mechanics of Soils and Foundations, Second Edition

Soil Strength and Slope Stability

Soil Strength and Slope Stability

Basic Geotechnical Earthquake Engineering

Basic Geotechnical Earthquake Engineering

Engineering Rock Mass Classification

Engineering Rock Mass Classification

Tunnelling, Foundations and Landslides

Soil Mechanics: A One-Dimensional Introduction

Soil Mechanics: A One-Dimensional Introduction

دانلود کتاب جداول مهم مهندسی عمران

کتاب دینامیک سازه آنیل چوپرا ویرایش سوم

دانلود کتاب لاتین - Applying AutoCAD 2010

کتابخانه مهندسی عمران (بخش نهم)

کتابخانه مهندسی عمران (بخش هشتم)

کتابخانه مهندسی عمران (بخش هفتم)

کتابخانه مهندسی عمران (بخش ششم)

کتابخانه مهندسی عمران (بخش پنجم)

کتابخانه مهندسی عمران (بخش چهارم)

کتابخانه مهندسی عمران (بخش سوم)

نوشته‌های پیشین

آرشیو موضوعی

برچسب‌ها

نویسندگان