استانداردهای ASTM

  (عایق های حرارتی)

ASTM Store Search found 154 matching products

C163-05(2010) Standard Practice for Mixing Thermal Insulating Cement Samples
C165-07 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C166-05(2010) Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C167-09 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168-10 Standard Terminology Relating to Thermal Insulation
C177-10 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C195-07 Standard Specification for Mineral Fiber Thermal Insulating Cement
C196-00(2010) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C203-05a Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C208-08a Standard Specification for Cellulosic Fiber Insulating Board
C209-07ae1 Standard Test Methods for Cellulosic Fiber Insulating Board
C240-08e1 Standard Test Methods of Testing Cellular Glass Insulation Block
C302-95(2007) Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303-10 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
C335/C335M-10e1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C356-10 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C390-08e1 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C411-05 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C419-08 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C421-08 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C447-03(2010) Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C449-07 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C450-08 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
C461-81(2008) Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
C488-05(2010) Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C516-08 Standard Specification for Vermiculite Loose Fill Thermal Insulation
C518-10 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C520-04(2010) Standard Test Methods for Density of Granular Loose Fill Insulations
C533-09 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534/C534M-08 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C547-07e1 Standard Specification for Mineral Fiber Pipe Insulation
C549-06 Standard Specification for Perlite Loose Fill Insulation
C550-10 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C552-07 Standard Specification for Cellular Glass Thermal Insulation
C553-08 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C578-10a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C585-10 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C591-09 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C592-10 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C610-10 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C612-10 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
C647-08 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C653-97(2007) Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C656-07 Standard Specification for Structural Insulating Board, Calcium Silicate
C665-06 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C667-09 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C680-10 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C686-90(2007) Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C687-07 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C692-08e1 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C726-05e1 Standard Specification for Mineral Fiber Roof Insulation Board
C727-01(2007)e1 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
C728-05(2010) Standard Specification for Perlite Thermal Insulation Board
C739-08 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
C740/C740M-97(2009) Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
C755-10 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
C764-07 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
C795-08 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C800-08 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
C835-06 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
C846-94(2009) Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C870-96(2004) Standard Practice for Conditioning of Thermal Insulating Materials
C871-08ae2 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C892-10 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
C916-85(2007) Standard Specification for Adhesives for Duct Thermal Insulation
C921-10 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C929-94(2009) Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C930-05 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C945-05 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C950/C950M-08 Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C991-08e1 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
C1014-08 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015-06 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1029-10 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1041-10 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
C1043-06(2010) Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044-07 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
C1045-07 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046-95(2007) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1055-03(2009) Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
C1057-03(2010) Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
C1058/C1058M-10 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1060-11a Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1071-05e1 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1086-09 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
C1101/C1101M-06 Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1104/C1104M-00(2006) Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1114-06 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1126-11 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1129-89(2008) Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130-07 Standard Practice for Calibrating Thin Heat Flux Transducers
C1134-90(2007)e1 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1136-10 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1139-08 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
C1146-09 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
C1149-08 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1153-10 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1155-95(2007) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1158-05 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
C1199-09e1 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1224-09 Standard Specification for Reflective Insulation for Building Applications
C1258-08 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1263-95(2010) Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1289-10 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290-11 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1302-04 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
C1303/C1303M-11 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
C1304-08 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1313/C1313M-10 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
C1320-10 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321-09 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1335-04(2009) Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1338-08 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1340/C1340M-10 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
C1363-05 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
C1371-04a(2010)e1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1373-03 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374-03(2009) Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1393-08 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
C1409-08 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410-10 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1423-98(2003) Standard Guide for Selecting Jacketing Materials for Thermal Insulation
C1427-07e1 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1482-10 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
C1483/C1483M-04(2009) Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
C1484-10 Standard Specification for Vacuum Insulation Panels
C1485-06 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
C1488-04e1 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
C1497-04 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
C1498-04a(2010)e1 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
C1511-04(2009) Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)
C1512-10 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
C1534-07e1 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
C1549-09 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C1558-03(2007) Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
C1559-04(2009) Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
C1574-04(2008)e1 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
C1594-10 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
C1616-07e1 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
C1617-09 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
C1630-06 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
C1631-08 Standard Specification for Cellular Polypropylene Thermal Insulation
C1639-10a Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation
C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
C1668-10 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
C1676-08 Standard Specification for Microporous Thermal Insulation
C1685-08 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
C1695-10 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
C1699-09 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
C1710-09 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
C1729-10a Standard Specification for Aluminum Jacketing for Insulation
C1743-10 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
C1744-10 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
E96/E96M-10 Standard Test Methods for Water Vapor Transmission of Materials